Case Study: My Experience With Materials

Everything You Need to Know About Clad Metals

To attain the best results of the metals that you will be using for whatever purpose you have in mind, two distinct alloys or metals must be bonded into one and the result is what you call the clad metals. You can make clad metals out of tube, sheet, rod, plate, and wire forms. Alloys and metals that can be clad are those that are typically used for engineering purposes. If you are looking for specific characteristics from your composite materials, then cladding is the best process to use to get the kind of characteristics that you need from them that you cannot get in just one material.

Clad metals can be easily bonded with the use of a wide range of processes from heavy chemical deposition, diffusion bonding, heavy electroplating, casting, welding, and co-rolling. The use of clad metals among jewelry has combined the use of low-cost base metals from the beauty of precious metals.

Two basic classifications can be drawn out of clad metals; you have the overlay clads and the inlay clads.

In terms of sophistication in their application, you can find them among inlay clads. With the use of an inlay, designers will be able to combine the use of less expensive materials such as stainless steel, copper, and brass with the use of more expensive materials such as silver, gold, platinum, and palladium. Such combination assists putting together the properties of precious metals with how you want them as well as the other properties of the other metal to their contribution in heat sinking, welding, and spring.

There are a lot of benefits to using inlay cladding than selective plating. It is only with the process of inlay cladding that utilization of wrought alloy is made possible. This can help in achieving a more consistent composition while the use of other alloys that cannot be plated before can just be plated. When you choose the best materials to do inlay cladding, there is no doubt that you can achieve a surface that is harder, more wear resistant, and more dense than plated surfaces.

When you say overlay cladding, on the other hand, you are referring to a method that will combine different metal layers and put them into one. The use of filler materials or adhesives is not done with this particular method of bonding metals or alloys. To bond them together, heat is used instead or very extreme pressure. With this process, you can reach up to seven layers of the new metal clad as well as three layers or two layers called as double clad or single clad, respectively. There are several industries that can take advantage of overlay clads that are very much capable of being custom-made. Make sure to check this homepage to get more facts about clad metals.

5 Lessons Learned: Materials

6 Lessons Learned: Materials